Board Size: 4-1/4" L x 2-7/8"
Wizard Board is pre-assembled and tested.
Controller has 7-bit Resolution.

Wizard-1 Manual

Wizard - 1 Board Document

Application Note

Product Video

The Wizard - 1 Board is a small 9 Volt dc powered interface board that will record and playback up to 5 minutes of servo motion for 4 standard 5 Vdc hobby R/C type servos and control 4 digital switched ON and OFF outputs at +4.5 Vdc (100 mA) per channel.

The Wizard - 1 board incorporates many features such as looping playback servo motion with variable delay between loops. An auto start-up on power option and on board connector for remote activation switching such as a PIR sensor, contact switch or mat pressure pad to initiate playback.

Recording sessions are built up on a channel by channel process - no complex programming is required. During recording, all previously recorded channels are re-played to aid synchronization the current channel being programmed. Programming is easily done, with a set of push button keys and control potentiometer built onto the board.
No host computer or other programming device is needed to operate the board, Board has 7-bit Resolution.
Programmable Recording time - 5 Minutes

Power supply, Servos, not included.
( 9 Volt dc @ 2 Amp power supply needed )

Click on image for a larger view







Board Size: 6-5/8" L x 4-1/2" W
Wizard - 2 Board is pre-assembled and tested.
Controller has 7-bit Resolution.

Wizard-2 Manual

Wizard - 2 Board Document

Wizard - 2 Board Applications -1

Note:
Regulated 9 Vdc @ 2 Amp and
Regulated 5 Vdc @ 2 Amp
power supplies recommended

Product Video

The Wizard - 2 Board will record / playback up to 5 minutes of action for up to 4 -R/C type servos and 4 - digital outputs or can be selected to operate 8 digital outputs with on board relays or direct digital signal output connection pads each with 5 minutes also per channel of recording time. The board also incorporates features such as looping playback action with variable delay between start-up on power up and sensor input. A terminal connection block for remote switch, pressure pad or synch signal from other device to initiate playback sequences is built on board also.

Recording sessions are built up on a track-by-track basis - no programming is required. During recording, all previously recorded tracks are re-played to aid synchronization.

FEATURES:

- 4 Servo output channels, each capable of recording and playback of up to 5 minutes of action.
- 8 Digital channels - 0/4V dc at 100 mA outputs each capable of recording and playback of up to 20 minutes of action
- 8 on board Relays ( 2 Amp @ 30 Vdc)
- Relay wire terminal connection blocks.
- 8 direct digital control signals with connection pads.
- Potentiometer to adjust the servo positions during recording or to determine the time delay between play loops during automatic loop play - adjustable between 0 and 65 seconds.
- NEXT, PLAY and RECORD buttons.
- Record enable / disable jumper
- AUTO-PLAY and LOOP-PLAY switches
- Status LED's , Board has 7-bit Resolution.
- Many more unique features.
- Programmable Recording time - 5 Minutes

Unit comes with user manual and assembled board.
( Servos and 9Vdc, 5Vdc, power supplies not included )

The Wizard 3 board will record and playback up to 4 separate tracks for up to 8 R/C type servos channels and 8 digital channels. The maximum recording time per track is 3 minutes for multiple track operation or 6 minutes for single track operation. The card incorporates features such as looping action with variable delay between loops, auto start-up on power up, a connection interface for a PIR, remote switch or pressure pad to initiate playback and the ability to daisy-chain several
cards together. The card may be connected to the optional Sound Board Pro to provide audio accompaniment to the tracks.

Recording tracks are built up in real time on a channel-by-channel basis no programming is required.

During recording all previously recorded channels are re-played to aid synchronization.

NOTE: Controller requires 2 Power Supplies(1-9VDC and 1-5 or 6VDC)
NOTE: Sound Board Pro required if sound option is used.

( 9 Vdc @ 2 Amp and 5-6 Vdc @ 2 Amp power supplies recommended )

Regulated Power Supplies ( 5-6 and 9 VDC ) and Servos, not included.

The ANIMATE BOARD is a 9 Volt dc powered full feature Sound, Motion and Switched ON / OFF output control interface board.

The controller has on-board sound recording and playback in to a 20 second sound chip with microphone and speaker output and up to 40 seconds of recorded and playback motion saved to a EEPROM for 4 standard +5 Vdc servos and control of 4 digital switched ON and OFF outputs at + 4.5 Vdc (100 mA) per channel action.

The Animate board incorporates many features such as looping playback servo motion with variable delay between loops. An auto start-up on power option and on board connector for remote activation switching such as a PIR sensor, contact switch or mat pressure pad to initiate servo playback and on- board sound output.

Recording sessions are built up on a channel by channel process - no complex programming is required.
During recording, all previously recorded channels are re-played to aid synchronization the current channel being programmed.Programming is easily done, with a set of push button keys and control potentiometer built onto the board.Speaker connection terminal allow the addition of an 8-16 ohm speaker which can be driven directly from the Animate board .Motion, Sound and Switched ON / OFF outputs are all controlled from a single board.Connection pins on-board for servos, output hookups.

Programmable Servo Recording time - 40 Seconds
Programmable Sound Recording time - 20 Seconds
( 9 Volt dc - 2 Amp Power Supply, Servos and Speaker not included ).......